What pour cost is and how to keep it on target.

Pour cost is the share of a drink's price that goes on the alcohol and mixers in the glass. A $2 pour sold for $10 has a pour cost of 20%. Below you'll find the formula, the targets bar-industry sources give for spirits, beer and wine, and one bottle, one wine and one keg worked down to the glass.

A bartender pours a measured spirit from a steel jigger into a cocktail tin
Photo by Rafael Rodrigues on Unsplash.

What does pour cost mean?

Pour cost is the bar's version of food cost. It tells you how many cents of every drink dollar went into the product itself. The rest pays for staff, rent, glassware and, at the end, your profit.

Bar inventory company Sculpture Hospitality puts it this way on its liquor cost guide: "Liquor cost, often called pour cost, shows how much of your alcohol sales went toward the product." So if you see "liquor cost" or "beverage cost", it's usually the same idea.

A lower number means you keep more of each sale. But a very low number can also mean prices that push guests away, so the goal is a target, not zero.

What is the pour cost formula?

There are two ways to use it.

For one drink: divide what's in the glass by the menu price.

  • Pour cost = cost of the drink ÷ menu price × 100

For the whole bar over a week or a month: count your stock and compare it with sales.

  • Pour cost = (starting inventory + purchases − ending inventory) ÷ alcohol sales × 100

The first tells you what a drink should cost you. The second tells you what it did cost you, including spills, free drinks and heavy pours. When the second number is higher than the first, product is leaving the bar without being paid for.

You can also turn the formula around to set a price. BevSpot, a bar inventory software company, gives it in its guide to pricing drinks as "Price ($) = Cost of Ingredients ($) / Target Pour Cost (%)". A drink that costs you $1.50, at a 20% target, should sell for $7.50.

What is a good pour cost for spirits, beer and wine?

There's no official industry number, and sources don't agree. Here are two that publish theirs:

CategorySculpture HospitalityBevSpot study
Spirits15% to 20%14%
Beer24% to 28%20%
Wine25% to 35%22%

Spirits usually run lowest because one bottle gives many drinks and a cocktail adds water, ice and mixers. Wine runs highest because guests can see bottle prices in shops and won't pay four times the price for long.

Your blended pour cost depends on what you sell. A bar that sells mostly wine will land higher than a cocktail bar, and that can be fine. Track each category on its own so one doesn't hide the other.

Worked example: from the bottle to the glass

These prices are examples. Put in your own invoice costs and menu prices.

A 750 ml bottle holds about 25.4 fl oz. The US standard drink sizes from the NIAAA are a good starting point for pours: 1.5 fl oz of spirits, 5 fl oz of table wine and 12 fl oz of regular beer.

Pour cost, workedExample only

Vodka: 750 ml bottle at $20, so about $0.79 per ounce

1.5 oz pour costs $1.18, sold at $814.8%

House red: 750 ml bottle at $12, about 5 glasses of 5 oz

One glass costs $2.40, sold at $1024%

Draft lager: half-barrel keg at $150, 124 pints

One pint costs $1.21, sold at $620.2%

The keg figure assumes every ounce reaches a glass. The 124 pints come from Wikipedia's keg article, which describes a US half-barrel as 15.5 gallons. In practice foam and line cleaning cost you some of that, so a real keg gives fewer pints and a higher pour cost.

How free pouring moves the number

Free pouring means pouring straight from the bottle without a measure. It's fast and looks good, but small extra amounts add up.

Take the vodka above. If the pour drifts from 1.5 oz to 2 oz, the cost of the drink rises from $1.18 to $1.58. The pour cost goes from 14.8% to about 20% on the same $8 price. The bottle gives about 12 drinks instead of nearly 17, so you sell around four fewer drinks from every bottle.

The house red works the same way. A 6 oz pour instead of 5 oz takes the glass from 24% to about 28%, and you get four glasses from the bottle instead of five.

Sculpture Hospitality's guide is plain about it: "Without measured pours or jiggers, bartenders can easily over-pour, driving up your liquor cost." The fixes it lists are jiggers, pour spouts or automated dispensers.

A short checklist for Monday:

  • Use a jigger or measured spouts for spirits, at least for the house pours.
  • Mark wine glasses or use a 5 oz carafe so a "glass" is the same every time.
  • Count your stock at the same time each week and compare the real pour cost with the menu math.
  • Write comps and spills down, so you can tell waste from over-pouring.

Why print the pour size on the menu

A menu that says "Glass, 5 oz" or "Pint, 16 oz" sets the pour for everyone. Guests know what they're paying for. New staff don't have to guess. And when a manager sees a 7 oz glass go out, there's a clear number to point to.

It also helps guests compare. A 10 oz craft beer next to a 16 oz lager makes sense when both sizes are printed. Our guides to the beer menu and the wine list show how to lay out sizes and prices so they read fast.

In Menupresso, each drink can have several labeled prices, such as "5 oz glass" and "Bottle", or "10 oz" and "Pint". When a keg runs dry, the Hide from guests switch takes it off the menu, and the QR code on the table stays the same. To check whether a drink price leaves enough after labor and other costs, try the free bar profitability calculator.

Sources

Put your pour sizes on the menu.

Show the glass, the pint and the bottle with their prices, and keep the same QR code on every table.

Create a free menuBar profitability calculator