Where do the 10:1 rule and the 2 cm minimum come from?
Both are rules of thumb from QR code companies, not from a standard. Bitly's guide to minimum QR code size puts it simply: "The QR Code distance-to-size ratio is about 10:1." It gives an example: "if a QR Code’s dimensions are 1 cm x 1 cm, it must be scannable from 10 cm away."
The same guide sets the floor: "A QR Code should be at least 2 cm x 2 cm (approximately 0.8 in x 0.8 in) for most QR Code scanners to read." Smaller codes can work on a good phone in good light. But you aren't printing for a good phone in good light. You're printing for a guest in a dim corner with an older phone.
So treat 2 cm as the smallest you'd ever print, and 10:1 as the starting point for everything else. Then test, because lighting, gloss and angle all change the result.
What size should the QR code be for each spot?
The distances below are our estimates of where guests usually stand or sit. Measure yours: if guests scan the window from the curb, use that distance. The sizes are for the code itself, not counting the white margin around it.
| Where the code goes | Usual scan distance | Code width |
|---|---|---|
| Printed menu page or check folder | 20 to 30 cm (8 to 12 in) | 2.5 to 3 cm (1 to 1.2 in) |
| Table tent or table sticker | 40 to 50 cm (16 to 20 in) | 4 to 5 cm (1.6 to 2 in) |
| Counter sign at the register | about 1 m (3 ft) | 10 cm (4 in) |
| Front window or door | 1.5 to 2 m (5 to 6.5 ft) | 15 to 20 cm (6 to 8 in) |
| Wall poster across the room | about 3 m (10 ft) | 30 cm (12 in) |
A table tent is the one owners most often get wrong. Some guests pick it up, but many scan it where it stands, from their seat. Size it for the seat.
Go a step bigger than the table when the code sits behind glass, under a glossy laminate, high on a wall or in low evening light.
Why does the white border matter?
The empty space around the code is part of the code. DENSO WAVE, the company that invented the QR code, says on its page about code area: "QR Code requires a four-module wide margin at all sides of a symbol." A module is one of the small black or white squares.
That margin adds more than people expect. On a typical menu code, it adds roughly a quarter to the width. A 4 cm code needs a white square of about 5 cm on the card. Keep table numbers, logos, borders and the edge of the card out of it.
How do you test it before ordering 40 cards?
Don't trust the screen preview. A code that scans from a bright monitor can fail on paper. Run this test first:
- Print one card at its final size, on the paper or laminate you'll use.
- Put it where it will go: on the table, on the counter, in the window.
- Scan it with three different phones. If you can, include an iPhone, an Android phone and one older model. Use the built-in camera app, not a scanner app.
- Scan from where guests actually are: seated, standing in line, on the sidewalk.
- Try it in your evening lighting, not just at noon.
- Check that the right menu opens and loads on mobile data, not just your Wi-Fi.
If any phone takes more than a couple of seconds, make the code bigger, the link shorter or the contrast stronger. Then print a new test card. Only order the full run of 40 table tents when all three phones scan on the first try.
Make the code once and keep it
A test is only worth doing if the code never has to change. In Menupresso, each menu gets its own short link and QR code, and that link never changes. When you edit dishes or prices and press Publish changes, the same printed code opens the new menu. If you need a code for another link, the free QR code generator makes one without an account; download the Large PNG for print.